|
|
(3 intermediate revisions by the same user not shown) |
Line 1: |
Line 1: |
− | > [[Main Page]] > [[Piano Expander based on Pianotec and Odroid-N2]]
| + | ==''' [[Piano_Expander_based_on_Pianoteq_and_Odroid-N2|Sorry - a big mistake - a typo in the name of Pianoteq - please used this link to follow the corrected web-page]]'''== |
− | | |
− | ----
| |
− | | |
− | == '''ARM 32 vs. AARCH64''' == | |
− | * [https://www.cnx-software.com/2016/03/01/64-bit-arm-aarch64-instructions-boost-performance-by-15-to-30-compared-to-32-bit-arm-aarch32-instructions/ CNX-Software: 64-bit ARM (Aarch64) Instructions Boost Performance by 15 to 30% Compared to 32-bit ARM (Aarch32) Instructions]
| |
− | * I still hope, that [https://www.modartt.com/ Modartt] will provide [https://www.modartt.com/pianoteq Pianoteq] sometimes compiled for AARCH64 architecture. In my opinion 32-bit code on any ARM module (Raspberry PI, Banana PI, Odroid etc.) which could also use AARCH64 code doesn't make sense. Modules which provide only ARM-32 bit architecture don't have the calculation power for Pianoteq. So why should those CPUs be supported? Canceling 32-bit support and switching to AARCH64 would be the right way....
| |
− | | |
− | ==''' Pianotec 6 Stage Installation on Odroid '''==
| |
− | * coming soon
| |
− | | |
− | === Some pictures ===
| |
− | | |
− | [[File:First-Test-Setup-2.jpg|300px]] [[File:First-Test-Setup-1.jpg|300px]]
| |
− | | |
− | [[File:Piano-Expander-Bechstein.jpg|300px]] [[File:Piano-Expander-MK2.jpg|300px]]
| |
− | | |
− | ==''' CPU Performance Benchmarks '''==
| |
− | === Benchmark by Marcos Daniel ===
| |
− | *[https://github.com/marcosdanielfl/ptq_bench/blob/master/ptq_benc.c Github: ptq_bench.c]
| |
− | ==== What the code does - description by Marcos Daniel ====
| |
− | <pre>
| |
− | It is a stress test, the program generates a MIDI file with ten glissandi
| |
− | from the lowest A to the top C, (on white keys).
| |
− | The damper pedal is down during each glissandi.
| |
− | In the first try, every note takes is played 100ms after the previous one.
| |
− | The program asks if there was an error in the playback, if there is not
| |
− | overload, you press "y" and it will generate another MIDI file, this time
| |
− | with 50ms between notes.
| |
− | So the sequence of notes duration is (geometric progression) 100ms, 50ms,
| |
− | 25ms, 12.5ms, 6.25 ms, and so on.
| |
− | When the computing power is not enough, an overload will occur, let's suppose
| |
− | it happens whith 12.5ms of delay, then the next delay will be the average of
| |
− | 12.5ms and 25ms (the lowest time without overload) = 18.75ms, if there is
| |
− | not error, next duration will be average between this last value and the
| |
− | maximum time with error, i.e. (18.75 + 12.5)/2 = 15.625ms.
| |
− | By doing this, quiclky one obtains a final result (10 or 12 tries), and when
| |
− | asked pressing key "t" (for terminate) the program exits.
| |
− | Any run can be skipped by ctrl+c.
| |
− | The program is "as is", and in Spanish.
| |
− | At last, but not least, on odroid XU4, it run more consistentlyif you run
| |
− | Pianoteq (or this test) from big cores excluding small ones, this can be
| |
− | done by taskset command, in case of XU4, big cores are numbered from
| |
− | 4 to 7, so the command would be
| |
− | taskset 0xF0 [command]. There is some improvement if you use less niceness,
| |
− | for instance I ran most testst this way:
| |
− | nice -10 taskset 0xF0 ./ptq_bench
| |
− | Pianoteq executable file must be in the same folder and version removed,
| |
− | simply named "Pianoteq".
| |
− | </pre>
| |
− | | |
− | ==== Results ====
| |
− | * the tests below are made without any optimisations/priorisations
| |
− | | |
− | <pre>
| |
− | 44,1 kHz, 128sample, 96 polyphony
| |
− | | |
− | odroid@odroid:~/Pianoteq 6 STAGE/arm$ ./ptq_benc
| |
− | | |
− | Test start
| |
− | | |
− | Press ctrl + c to cancel
| |
− | delay beween notes: 100.00 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 1
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 50.00 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 2
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 25.00 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 3
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 12.50 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 4
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 6.25 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 5
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 9.38 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 6
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 10.94 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 7
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 11.72 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 8
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 12.11 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 9
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 12.30 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 10
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 12.21 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 11
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 12.26 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 12
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 12.28 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 13
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 12.29 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 14
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 12.29 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 15
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 12.28 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 16
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 12.28 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 17
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 12.28 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 18
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 12.28 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 19
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 12.28 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 20
| |
− | Did audio fail? y/n, t to terminate
| |
− | t
| |
− | Total attemps: 20,final delay between notes 12.28
| |
− | </pre>
| |
− | | |
− | <pre>
| |
− | 44,1 kHz, 64sample, 96 polyphony
| |
− | | |
− | odroid@odroid:~/Pianoteq 6 STAGE/arm$ ./ptq_benc
| |
− | | |
− | Test start
| |
− | | |
− | Press ctrl + c to cancel
| |
− | delay beween notes: 100.00 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 1
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 50.00 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 2
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 25.00 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 3
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 12.50 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 4
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 18.75 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 5
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 15.62 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 6
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 14.06 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 7
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 13.28 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 8
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 13.67 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 9
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 13.48 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 10
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 13.38 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 11
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 13.33 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 12
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 13.31 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 13
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 13.29 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 14
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 13.29 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 15
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 13.28 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 16
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 13.28 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 17
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 13.28 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 18
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 13.28 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 19
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 13.28 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 20
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 13.28 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 21
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 13.28 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 22
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 13.28 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 23
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 13.28 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 24
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 13.28 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 25
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 13.28 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 26
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 13.28 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 27
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 13.28 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 28
| |
− | Did audio fail? y/n, t to terminate
| |
− | t
| |
− | Total attemps: 28,final delay between notes 13.28
| |
− | </pre>
| |
− | | |
− | <pre>
| |
− | | |
− | 48 kHz, 64sample, 96 polyphony
| |
− | | |
− | odroid@odroid:~/Pianoteq 6 STAGE/arm$ ./ptq_benc
| |
− | | |
− | Test start
| |
− | | |
− | Press ctrl + c to cancel
| |
− | delay beween notes: 100.00 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 1
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 50.00 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 2
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 25.00 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 3
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 12.50 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 4
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 18.75 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 5
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 15.62 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 6
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 17.19 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 7
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 17.97 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 8
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 18.36 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 9
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 18.55 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 10
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 18.46 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 11
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 18.51 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 12
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 18.53 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 13
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 18.54 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 14
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 18.55 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 15
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 18.55 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 16
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 18.55 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 17
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 18.55 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 18
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 18.55 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 19
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 18.55 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 20
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 18.55 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 21
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 18.55 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 22
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 18.55 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 23
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 18.55 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 24
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 18.55 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 25
| |
− | Did audio fail? y/n, t to terminate
| |
− | t
| |
− | Total attemps: 25,final delay between notes 18.55
| |
− | </pre>
| |
− | | |
− | <pre>
| |
− | 48 kHz, 128 sample, 96 polyphony
| |
− | | |
− | odroid@odroid:~/Pianoteq 6 STAGE/arm$ ./ptq_benc
| |
− | | |
− | Test start
| |
− | | |
− | Press ctrl + c to cancel
| |
− | delay beween notes: 100.00 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 1
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 50.00 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 2
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 25.00 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 3
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 12.50 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 4
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 18.75 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 5
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 21.88 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 6
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 23.44 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 7
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 22.66 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 8
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 23.05 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 9
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 23.24 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 10
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 23.14 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 11
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 23.10 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 12
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 23.07 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 13
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 23.06 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 14
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 23.05 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 15
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 23.05 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 16
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 23.05 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 17
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 23.05 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 18
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 23.05 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | yTry number 19
| |
− | Did audio fail? y/n, t to terminate
| |
− | | |
− | delay beween notes: 23.05 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 20
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 23.05 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 21
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 23.05 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 22
| |
− | Did audio fail? y/n, t to terminate
| |
− | t
| |
− | Total attemps: 22,final delay between notes 23.05
| |
− | </pre>
| |
− | | |
− | <pre>
| |
− | 32 kHz, 64 sample, 96 polyphony
| |
− | | |
− | odroid@odroid:~/Pianoteq 6 STAGE/arm$ ./ptq_benc
| |
− | | |
− | Test start
| |
− | | |
− | Press ctrl + c to cancel
| |
− | delay beween notes: 100.00 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 1
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 50.00 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 2
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 25.00 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 3
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 12.50 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 4
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 6.25 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 5
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 3.12 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 6
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 4.69 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 7
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 3.91 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 8
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 3.52 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 9
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 3.32 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 10
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 3.42 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 11
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 3.47 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 12
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 3.44 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 13
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 3.43 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 14
| |
− | Did audio fail? y/n, t to terminate
| |
− | n
| |
− | delay beween notes: 3.42 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 15
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 3.43 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | CPU overload detected. Your CPU is not powerful enough, or the power-saving settings of your computer are too aggressive. You can adjust the performance of Pianoteq, or disable CPU overload detection, in the 'Perf' tab of the 'Options' dialogue.
| |
− | Try number 16
| |
− | Did audio fail? y/n, t to terminate
| |
− | y
| |
− | delay beween notes: 3.43 milisegundos
| |
− | Command to run is: "./Pianoteq" --headless --play-and-quit --midi miditest.mid; string size: 59
| |
− | Current preset: Steinway D Prelude, instrument: Grand Steinway D
| |
− | Try number 17
| |
− | Did audio fail? y/n, t to terminate
| |
− | t
| |
− | Total attemps: 17,final delay between notes 3.43
| |
− | </pre>
| |
− | | |
− | ----
| |
− | | |
− | > [[Main Page]] > [[Piano Expander based on Pianotec and Odroid-N2]]
| |